Celestron 44302 Manuel d'utilisateur télécharger pdf (Page 6)

decrease gradually to 10x as you move further away (up to about 1” or

25mm). You will have to refocus at each position.

3. For high power, you will move the focus knob almost all the way to the right

which will give you 150x. At the high power, your views will be greatly

magnified but somewhat darker and sometimes hard to find the object. The

most enjoyable views can be at the lower powers which have a wider field of

view and brighter image. Also, the microscope must be directly on the object.

Illumination

The LEDs of the microscope are automatically turned on when the USB cable is

inserted into the USB port on your computer. There is no illumination adjustment on

this microscope but you may be able to position the microscope over the object you

are viewing at different angles (or positions) to give the optimum illumination.

Stand

You can use the microscope by holding it with your hand.

However, if you want a steadier view for looking or

imaging you may prefer to mount the microscope in the

stand.

Hold the microscope as shown on page 5 and then push it

into the holding bracket on the stand. The correct

positioning of the stand bracket is shown to the left.

You can then position the stand at various angles by

loosening the locking knob and then retightening it.

1 2 3 4 5 6 7 8 9 10 11 ... 59 60

Pas de commentaire

Celestron 44302 Manuel d'utilisateur Page 6