Celestron Compustar Manuel d'instructions télécharger pdf (Page 14)

Figure 6A (left). A GPINT connector, available from Shoestring Astronomy. Note the male

plug to be connected to the parallel port on the autoguiding computer and the female RJ-11

modular jack port with copper connection pins, where the RJ-11 cable can be attached.

Figure 6B (right). A GPUSB connector, available from Shoestring Astronomy. Note the

USB cable that can be connected to the autoguiding computer and the female RJ-11

modular jack port with copper connection pins, where the RJ-11 cable can be attached.

After the connector is attached to the proper port on the autoguiding computer, the jack on the

RJ-11 cable will be inserted and locked into to the female modular jack plug on the connector

(Figure 7). So, where does the other end of the RJ-11 cable go?

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Pas de commentaire

Celestron Compustar Manuel d'instructions Page 14