Celestron COSMOS FirstScope Manuel d'instructions télécharger pdf (Page 4)

4 | ENGLISH

the StarPointer FinderScoPe

The FirstScope comes with a StarPointer red-dot ﬁ nderscope that you will use as a sighting tool when aiming the

telescope at a target.

To install your StarPointer ﬁ nderscope:

1. Remove the two silver nuts from the threaded posts at the top of the tube, near the focuser.

2. Place the two holes in the base of the ﬁ nderscope over the threaded posts so the ﬁ nderscope

base sits ﬂ ush on the telescope tube. Make sure that the round window on the ﬁ nderscope is

pointed toward the top of the tube (the end of the telescope tube with the focuser).

3. Thread the two nuts back onto the threaded posts.

Fig. 3

1 2 3 4 5 6 7 8 9 ... 39 40

Pas de commentaire

Celestron COSMOS FirstScope Manuel d'instructions Page 4